Versatile Building Products Poly Urea 5000 is uses an amazing new technology in the urethane arena that is 100 percent solids and allows film thickness to build in excess of standard systems with water clarity and mirror smoothness. The cross linking of the film in the cure makes it exceptionally tough and durable, maintaining its gloss far beyond that of comparable systems. The chemistry is based on polyurea and much attention has been given to the application characteristics in its formulary. As a result, Poly Urea 5000 is extremely user friendly without having sacrificed the performance of the finished product. Because the product is non flammable and has a very mild odor we expect it to be the product of choice when working in and around areas where an offensive odor is an issue. The applications for this product are almost limitless; from the high end residential applications to retail settings with high traffic requirements or food service areas where stain resistance and clean ability are paramount as well as light industrial.

5073 is formulated using the same technology as the 5000 and we have made it thinner, dry faster and given it a longer pot life! We have reduced the viscosity down to levels comparable to a medium solids CRU. The benefits 5073 has over the 5000 is that it is easier to install, has more pot life, cures to a hard film faster (dries in just over an hour) and is suitable for exterior exposure without yellowing. The only draw back is that 5073 is considered combustible and its use should be restricted to well ventilated areas. Use 5073 when you need a faster turn around time. If you are sealing decorative concrete then you should look at using the 5205 Hybrid Primer (it dries in 30 minutes) and the 5073 Topcoat. This combination provides a fantastic looking finish that can be used outside or inside. Use it over Stained Concrete, Microtopping's and Stamped Concrete.