P-Stain was created to provide a stain that allows can be mixed with water or solvent. The applicator mixes the powder stain at the jobsite and then applies the mixture to concrete using brooms, soft brushes or sprayers. When mixed with water P-Stain will settle into the low spots on textured concrete which fill provide an antiqued effect.When mixed with Solvent the P-Stain will provide more of a DYE look. The stain can be applied with a pump up sprayer, HVLP sprayer, airless, sponge, foam brush or rag to create the desired effect you are looking for. Versa-Stain is available in 12 standard colors. These 12 colors can also be blended together to achieve more color variations. P-Stain can also be mixed with the Versa-Stain liquid if desired. For P-Stain to work well the protective sealer used must be a pentrative type sealer so it will soak into the P-Stain as well as the concrete beneath it.