Metal lathe Cement is a polymer modified fast setting Non-Shrink repair mortar. It can be troweled from 2-inches to a feather edge and not crack. Metal Lathe Cement will dry in 60-90 minutes and it will accept most coatings at that point. The adhesion of Metal Lathe Cement to plywood or concrete is fantastic. When tested with our deck coating system the adhesion of the metal lathe cement to plywood was greater than the adhesion of 18 1-inch staples per sq ft. Use Metal Lathe Cement to repair defects or create slope in existing walking areas. Metal Lathe Cement does not contain gypsum so it may be used on exterior surfaces. Just add 1 gallon of water per bag and mix, pour and place. It is that easy.

DIVOT PATCH VERSATILE DIVOT PATCH is a specially formulated blend of fast-setting, shrinkage compensated cements and polymer, designed to fi ll and smooth virtually all masonry surfaces. VERSATILE DIVOT PATCH is easy to apply, hardens quickly without shrinking, and produces a smooth surface that is suitable for painting, sealing, and coating in as little as 15 minutes. Through its rapid curing mechanism, DIVOT PATCH eliminates the curing time associated with ordinary cement and latex patch systems. Less downtime saves money while still allowing for last minute repairs before subsequent coating applications. Use DIVOT PATCH to fi ll in surface defects such as spalls, gouges, cracks, dents, chips, scrapes, and honeycombs. DIVOT PATCH contains no course fi ller or sand, allowing it to be applied at true feather-edge thickness by steel trowel or putty knife to any prepared surface.
Use Divot Patch to Fill Cracks and Spalls in Concrete.

V-100 is a Heavy Duty Cleaner Degreaser. V-100 is a versatile concentrated cleaner for cleaning a multitude of hard surfaces. Clean oil, grease,dirt, and grime, from asphalt, concrete, metal, and painted walls. V-100 is ideal for any heavy duty industrial cleaning job. Use V-100 on a ratio of 4-1 with water for heavy duty cleaning and a ratio of 9-1 for general cleaning.

Want a better way to remove paints, urethanes and enamels without the back-breaking work of sanding and chiseling? Made from 100% American Grown Soybeans, SOY•Gel does all that and more. Throw out the sand paper and put away the knee pads. Just put some SOY•Gel on the coating to be removed, allowing you to work on another project. Let SOY•Gel do the work, not you! Within minutes you can see the power of SOY•Gel start to lift the coatings, all while you spend time on other tasks. Not sure how many coats need to be removed? SOY•Gel doesn't care. One coat, five coats, twenty coats, SOY•Gel will remove them all and leave you smiling. In addition Soy Gel goes a long ways, with one gallon giving you up to 200 sq. ft. coverage. That's THREE times the coverage of most traditional strippers!! With SOY•Gel you won't have to deal with harsh odors that we all know so well with other strippers. No odor SOY•Gel is the perfect helper for anyone wanting to remove paints, urethanes, and enamels.

Just pour and scrape for $0.08 per sq. ft.!! We've taken mastic removal to a higher level! BEAN•e•doo Mastic Remover makes the removal of asbestos mastic, carpet mastic, and ceramic tile mastic clean and simple. Users of BEAN•e•doo Mastic Remover are amazed at the NO ODOR and EASY CLEAN-UP properties of this product. Just pop the tile or pull up the carpet. Then pour BEAN•e•doo Mastic Remover on the surface. In about an hour you will be amazed at how the mastic turns so soft you could scrap it off with your business card! All that is needed for clean up is a water rinse.