Versa-Crete Polymer Concentrate is used to resurface over old worn concrete surfaces to provide a new stamped or Microtopping concrete finish. A concentrated product, Versa-Crete is mixed with water on a 1:1 or 2.5:1 ratio and then added to a sand and cement blend. You will find that the Versa-Crete Polymer is a very stable product which means you won't get the air bubbles in your Quarter inch overlays while the material is wet. We provide starting point blends for the different types of mortars needed. This allows the applicator to have greater control of the end product while reducing the shipping costs. Who wants to pay $10 to ship a 50 lb bag of sand and cement. That can add up very fast and before you know it your profits are reduced. Versa-Crete can be stamped 1/4-1/2-inch thick and it will accept most conventional stamping tools. Versa-Crete can also be sprayed on or troweled on to create any finish you desire. It is truly the only Concrete Polymer you will need. You will find Versa-Crete on driveways, patios, showrooms and restaruant floors.

Microtopping
Versa-Crete is used to resurface floor surfaces to create a wide range of economical decorative finishes. From Cool to the touch Knock-Down to custom Skip Troweled Finishes, You Can Do It With Versa-Crete. A two component product, Versa-Crete consists of a Proprietary Liquid Polymer, specially formulated Cement blend and aggregate which are mixed by the applicator on the job-site.